The work principle of wood milling cutter

When the wood milling cutter and workpiece edge line axis coincident or close to the edge line of the workpiece, the situation will be very serious.

1. Check the machine's power and rigidity to ensure that the needs of the wood milling cutter diameter can
wood sds plus auger bit
The use of the machine.
2. Spindle tool overhang on the shortest possible, reduce the impact of the wood milling cutter and workpiece axis position to shock loads.

3. Suitable for use in this process is the correct pitch wood end mill cutter, to ensure there is not much at the time of the cutting insert and the workpiece while vibration caused by engagement, on the other hand, when the narrow milling or milling a workpiece cavity to ensure that there is sufficient blade and workpiece engagement.

4. To ensure that the use of the feed amount per blade, so that when the chip is sufficiently thick to obtain the correct cutting effect, thereby reducing tool wear. Using positive geometry indexable inserts, resulting in a smooth cutting performance and lowest power.

5. Selection of suitable width wood milling cutter diameter workpieces.

6. Choose the right main angle.

7. Correct placement wood cutting tct saw blade.

8. Using only the cutting fluid when necessary.

9. Follow the rules of the tool maintenance and repair, and monitoring tool wear.

The application of wood drill bits

wood drill bits is a very commonly used tools, grinding a wood drill bits for a better work efficiency and quality are of great help! Well, here we go! More accurate wood drill bits holes: a dash dot dot wood drill bits two small holes with a diameter of 3-5 (the diamond core drill bit should be relatively sharp angle at about 90 degrees, a faster speed of about 700-1300 to Wuyi wood drill bitsing, for example) 3 and if the required hole diameter of 8 or less. Directly with a wood drill bits down. If the diameter of 8 or more points twice best wood drill bits. (General category) reaming countersunk head: a slow speed wood drill bits should, angle of about 120 degrees. (General category) countersunk screw some people directly with a large ground-type drill bits for wood. Such as the M8 screws, diameter 8.5 countersunk hole diameter 13, with a diameter of 13 direct ground type, middle left diameter 8.5 to about 30 long waterway hole: M12 tooth generally take a ditto ditto 2 3 To require the central through-hole with a diameter of 8 to first with a diameter of 8.5 bilateral first wood drill bits, then the diameter of 10.5 reaming, and then wood drill bits through the practice of direct 8 iron convenient row. wood drill bits grinding method, focusing on iron round nest chamfer wood cutting tct saw blade row.

The introduction of wood milling cutters

When optimizing the milling effect, cutter blade is another important factor, if at any time while participating in the wood cutting tct saw blade the number of blades is more than one advantage, but the disadvantage is that too much to participate in wood milling cutters the number of blades at the same time, at the time of wood milling cutters each a wood milling cutters edge can not simultaneously wood milling cutters power required and the number of participating in the wood milling cutters of the wood milling cutters edge related to chip formation, wood milling cutters edge loading and processing a result, the position of the workpiece relative to the cutter played an important role. When face milling with a wood milling cutters width ratio of about 30% larger cutter and the cutter location close to the center of the workpiece, so little change in chip thickness. When the Leads end mill cutter thickness of chip thickness ratio at the center of the wood milling cutters slightly thinner.

To ensure a high enough average chip thickness volume feed per tooth, you must correctly identify suitable for the process of the cutter teeth. Cutter pitch is the distance between the diamond cutting saw blade edge and effective. The cutter can be divided into three types according to this value - fine-toothed cutter, cutter teeth sparse, special fine-toothed cutter.

There are natural and artificial abrasive abrasive abrasive two categories

There are natural and artificial abrasive abrasive abrasive two categories. Classification according to the hardness of superhard abrasive abrasive and general extravagant two Abrasive flap disc  categories. A wide range of abrasives,wood drill bits  from softer household detergents, abrasive stones hardest material to diamond. Each product is a precision abrasive essential materials. Many natural abrasives, abrasive cutting disc  has been replaced by artificial abrasive. Abrasive flap disc for blasting, water jet cutting, manufacturing coated abrasives, filter, aggregate and other wear-resistant flooring, multi-application in metal, steel, castings, ceramics, aluminum, wood, leather industry.

Wood milling cutter is mainly used for processing flat

Wood milling cutter is used for milling, having one or more knife rotary cutter teeth. Each tooth margin sequentially intermittently cut workpiece at work. Wood milling cutter is mainly used for processing flat, level, trench on milling, shaping the surface of the workpiece and the cutting and so on. On a horizontal milling machine for machining plane. Wood milling cutter teeth distributed over the circumference of the cutter, press cutting wheels teeth and tooth divided into two helices. Divided by the number of teeth of two coarse teeth and fine. Helical teeth less coarse tooth cutter, cutter high intensity, the chip large space for roughing; fine-tooth cutter suitable for finishing. Tooth by mechanical clamping method fastened on the cutter body. This may change in the teeth may be a bit overall tool materials, the tool Diamond Core Drill Machine  also be a bit of welding materials. Effect when optimizing milling, cutter blade is another important factor, if at any time milling cutting the number of blades simultaneously participate in more than one advantage, but the disadvantage is that too few cutting blade also participate in cutting each a cutting edge can not simultaneously cutting power required and how to participate in the cutting of the cutting edge related to the chip formation process, the cutting edge load, and the processing results, the position of the cutter relative to the workpiece to play an important role.

Wood milling cutter is used for milling

 Each tooth margin sequentially intermittently cut workpiece at work. When Wood milling cutter blade each time into the cutting, the cutting edge must withstand shock loads, load cross-section depends on the chip, workpiece material and cutting type. When the Leads, whether correct occlusion between the cutting edge and the workpiece is an important direction. Wood milling cutter is mainly used for processing flat, level, trench on milling, shaping the surface of the workpiece and the cutting and so on. On a horizontal milling machine for machining plane. Wood milling cutter Metal Cutting Saw Blades  distributed over the circumference of the cutter, press straight teeth and tooth divided into two helices. Divided by the number of teeth of two coarse teeth and fine. Helical teeth less coarse tooth cutter, cutter high intensity, the chip large space for roughing; fine-tooth cutter suitable for finishing. Tooth by mechanical clamping method fastened on the cutter body. This may change in the teeth may be a bit overall tool materials, the tool can also be a bit of welding materials. Effect when optimizing milling, cutter blade is core drilling bits  important factor, if at any time milling cutting the number of blades simultaneously participate in more than one advantage, but the disadvantage is that too few cutting blade also participate in cutting each a cutting edge can not simultaneously cutting power required and how to participate in the cutting of the cutting edge related to the chip formation process, the cutting edge load, and the processing results, the position of the cutter relative to the workpiece to play an important role.Wood milling cutter is used for milling, having one or more knife rotary cutter teeth.

When the wood milling cutters is located entirely outside of the axis line width of the workpiece

   The last tip is to leave the wood milling cutters piece, that from the beginning of the cutting blade to the left, cutting forces have been acting on the outermost tip until the impact of unloading so far. When the center line of the workpiece edge cutter located just online, when the chip thickness reaches the maximum when the blade from cutting, impact load reaches the maximum at the time of the Leads. When the cutter axis is located within the width of the workpiece, the initial shock loads along the cutting core drilling bits  cut when a tip from a distance far the most sensitive parts of bear, but also in the relatively stable retraction exit cutting blade. For each blade, the cutting when the cutting edge to be away from the workpiece exit way is important. Remaining close to the retraction material may Drilling Tools the number of blade gap. When the chips from the workpiece along the blade rake will produce a transient tensile force and the workpiece often produce glitches. The tensile force threatening the cutting edge safety in dangerous situations. When the wood milling cutters is located entirely outside of the axis line width of the workpiece, the impact force at the time of cut by the blade is subjected to the outermost tip, and this will mean that the initial impact load is received by the most sensitive parts of the tool.