The introduction of wood milling cutters

When optimizing the milling effect, cutter blade is another important factor, if at any time while participating in the wood cutting tct saw blade the number of blades is more than one advantage, but the disadvantage is that too much to participate in wood milling cutters the number of blades at the same time, at the time of wood milling cutters each a wood milling cutters edge can not simultaneously wood milling cutters power required and the number of participating in the wood milling cutters of the wood milling cutters edge related to chip formation, wood milling cutters edge loading and processing a result, the position of the workpiece relative to the cutter played an important role. When face milling with a wood milling cutters width ratio of about 30% larger cutter and the cutter location close to the center of the workpiece, so little change in chip thickness. When the Leads end mill cutter thickness of chip thickness ratio at the center of the wood milling cutters slightly thinner.

To ensure a high enough average chip thickness volume feed per tooth, you must correctly identify suitable for the process of the cutter teeth. Cutter pitch is the distance between the diamond cutting saw blade edge and effective. The cutter can be divided into three types according to this value - fine-toothed cutter, cutter teeth sparse, special fine-toothed cutter.