The work principle of wood milling cutter

When the wood milling cutter and workpiece edge line axis coincident or close to the edge line of the workpiece, the situation will be very serious.

1. Check the machine's power and rigidity to ensure that the needs of the wood milling cutter diameter can
wood sds plus auger bit
The use of the machine.
2. Spindle tool overhang on the shortest possible, reduce the impact of the wood milling cutter and workpiece axis position to shock loads.

3. Suitable for use in this process is the correct pitch wood end mill cutter, to ensure there is not much at the time of the cutting insert and the workpiece while vibration caused by engagement, on the other hand, when the narrow milling or milling a workpiece cavity to ensure that there is sufficient blade and workpiece engagement.

4. To ensure that the use of the feed amount per blade, so that when the chip is sufficiently thick to obtain the correct cutting effect, thereby reducing tool wear. Using positive geometry indexable inserts, resulting in a smooth cutting performance and lowest power.

5. Selection of suitable width wood milling cutter diameter workpieces.

6. Choose the right main angle.

7. Correct placement wood cutting tct saw blade.

8. Using only the cutting fluid when necessary.

9. Follow the rules of the tool maintenance and repair, and monitoring tool wear.