Take advantage of the hole wood milling cutter

1. scribing edge with arc design, impact resistance, wear resistance and better life than ordinary products to enhance the three-fold drill bits for wood. 2.2 scribing edge to prevent small wood chipping. 3. Take hole for open circular groove, was taken out of the hole is very smooth. 4. Take alloy hole wood milling cutter look beautiful, durable, high precision, good wood cutting tct saw blade and wood milling cutter performance, there is sufficient bending strength and wear resistance Good advice: Try using a short edge of woodworking tools, edge mouth is too long or too long blade will cause vibration and deflection, resulting in damage to the tool. 2, we recommend using a shank diameter of wood milling cutter. 3, the normal use, an appropriately wood sds plus auger bit is very important, old ones, there is a cross-sectional, not round, severe wear and jacket tapered bore, can not provide sufficient clamping force, resulting in flying off, vibration or broken hilt. Also, do not think that the case must be reliable new jacket. When the wood milling cutter handle was found after clamping shank contact marks or uneven grooves, indicating a slip case and jacket bore distortion, then the need to immediately replace the jacket.